Polytetrafluoroethylene PTFE Teflon Coating Statistics
Polytetrafluoroethylene PTFE coating uses a one or two-coat (primer/topcoat) system. These products have the highest operating temperature of any fluoropolymer and have extremely low coefficient of friction, fair abrasion resistance and good chemical resistance.
A PTFE coating can withstand a maximum use temperature of 600 ° F. This coating is typically applied to a thickness of 1-3 mils.
Performance Engineerd Coatings offers a wide range of Polytetrafluoroethylene PTFE Teflon Coating Statistics to meet most of your application needs including FEP coatings, which have similar characteristics of PTFE coatings. Both PTFE and FEP coatings are food grade coatings. Performance Engineered Components offers all Teflon Coating Services in Milwaukee and the surrounding area.,,,.
PTFE Coating Statistics | |
---|---|
Tensile Strength (ASTM D1708) | 3000-5000 psi |
Elongation (ASTM D1457) | 300-500% |
Impact Strength (ASTM D256) | 3.5 ft-LB/in |
Hardness (ASTM D2240) | 50-65 HB (shore D) |
Abrasion Resistance (Tabor) | 12 mg |
Coefficient of Friction (ASTM D1894) | .12 -.15 static, .05 -.10 dynamic |
Dielectric Strength (ASTM D149) | 450 volts per mil |
Use Temperature | 600°F max |
Melting Point | 625°F |
Thermal Conductivity | 1.7 BTU-in/h-ft 2-°F |
Chemical Resistance (ASTM D543) | Excellent |
Salt Spray Resistance (ASTM B117) | Fair |
Water Absorption (ASTM D570) | < .01% |
Thickness | .001″ – .003″ |
Contact Performance Engineered Components for all your coating needs including:
Exact compliance with Teflon Coating Services, Chrome Oxide, Tungsten Carbide and coating specifications for industrial, food grade, aerospace and government specs.
Contact Chuck Donald at: 262 250 8460